Hello everyone,
The following versions of Totara Learn have now been released:
A big thanks to the following people for their contributions to this release:
- David Scotson - Synergy Learning - TL-30689
- Davo Smith - Synergy Learning - TL-30936
- Joseph Kelly - Digital Learning (Chile) - TL-30654
Release 14.1 (28th June 2021):
Performance improvements:
TL-30630 Fixed counting likes/comments in a workspace discussion multiple times in one request
Previously when loading a list of discussions in a workspace, the number of
likes and number of comments for each discussion were independently
queried, resulting in a large number of queries run for a single request.
With this patch in place when loading a list of workspace discussions, the
counts are performed once with the initial query, decreasing the number of
queries needed to return the results.
TL-30973 Improved the performance of the Record of Learning: Course report source when used with a very large number of course completion history records
Prior to this patch on older databases a large number of course completion
history records (in the millions) would slow down the Record of Learning:
Course report when the Past Completions columns were added. With this patch
the report should now behave faster when used with a large dataset.
Important: This change introduces a new index on the
course_completion_history table, which can take several minutes to run on a
large Totara instance.
TL-31089 Improved user content restriction query performance
Mainly on MySQL databases the user content restrictions were scaling poorly
with larger amounts of job assignment records. This has been fixed and
performance on MySQL 5.7 and MySQL 8 is now significantly improved if user
content restrictions are used in reports.
TL-31095 Improved performance of reports based on the user source when certain count columns are used
The query part for the following columns changed to improve performance:
* User's Achieved Competency Count
* User's Courses Started Count
* User's Courses Completed Count
* Course Completions as Evidence
* Extensions
Improvements:
TL-29716 Allow Uniform/Reform form state to be controlled by an embedding component
TL-29734 Updated 'help command' into 'hero card' that contains 'sign-in', 'sign-out' and 'help' button in Microsoft Teams
TL-30025 Created a new 'help tab' to display 'help' information in Microsoft Teams
TL-30027 Added sign-out link for manual login settings on each static tab in Microsoft Teams
TL-30221 Added 'Achievement Status' column and filter to the Competency Status report
It is now possible to filter records shown in the Competency Status report
on the Achievement status column thus allowing users to view only active
(current) achieved values.
TL-30395 Set loglevel to "warn" in .npmrc, which suppresses "notice" level output such as the core-js advertising on npm ci / npm install.
TL-30791 Added a logo button to use by default for Microsoft OAuth2 issuers on the site login page
A new option has been added to Microsoft issuers for the OAuth2 plugin,
named 'Show default Microsoft branding'. This ensures that any new issuers
of the Microsoft type meet Microsoft's corporate branding requirements.
Existing issuers of the Microsoft type are not affected by this change.
TL-30794 Added config for report builder graph to specify max value for x and y axes
TL-30797 A users competency page now uses up to 2 lines when viewing the competency graph
TL-30852 Renamed the 'Open in new window' button in Microsoft Teams to 'Open in browser'
TL-30934 Added warning to the environment page if charset of current database does not support four-byte characters
TL-31009 Adjusted the default scheduled 'send_registration_data_task' task to randomise the time it is run to distribute the load
The change also uses an upgrade script to reset the task to ensure the
new 'randomised' time is set.
TL-31021 Ensure MS teams theme CSS is compatible with older browsers
TL-31038 Added settings option to Microsoft Teams tabs to allow the modification of existing tabs
TL-31040 Added user custom field notification placeholders
User custom/profile fields are now available to use as placeholders in
notifications that use the 'user' placeholder group, such as 'Subject',
'Manager' and 'Recipient'. Checkbox and non-public fields are excluded.
Also, ID Number, Language and Description placeholders have been added to
the 'user' placeholder group.
Bug fixes:
TL-28866 Fixed the report builder course category filter showing the hidden workspace and performance activity categories.
TL-29257 Fixed styling of "programs" header in record of learning
TL-29923 Clicking on a link in a navigation block no longer expands the node
TL-29958 Report tiles no longer have the brand colour in their shadow
TL-30032 Added the alert when users visit external url from totara msteams tabs
TL-30057 Fixed pulling the image from Vimeo to render on resource cards when Vimeo config is enabled
TL-30072 Fixed page advancement on multi-value multichoice questions in lessons
When using a multi-choice question with multiple answers in a lesson where
the user is allowed to have multiple attempts, the system now uses the
defined 'Jump to' page as defined in the answers as follows:
* If the answer is correct, i.e. all the correct answer(s) are selected
without selecting an incorrect answer, the 'Jump to' value of the first
correct answer is used.
* If the answer is not totally correct, i.e. not all correct answer(s) are
selected or any incorrect answer is selected, the 'Jump to' value of the
first incorrect answer is used.
* It only some of the correct answers are selected and the question has no
incorrect answers defined, the user will stay on the same page.
TL-30119 The bottom of 'g' is no longer hidden in a mini profile card
TL-30254 Fixed error being caused when mathjax filter was enabled
TL-30359 Fixed a report builder bug where tag filter could exclude rows without any tags
Prior to this patch, reports that had a tag filter added did not show rows
without any tags assigned when resetting the tag filter to the 'Any value'
option after having it set to another option. This bug is fixed with this
patch.
TL-30481 Fixed PHP warning if language pack cannot be downloaded and provided option to retry or choose different language
TL-30563 Fixed bug causing enrolment error exception when default role has been deleted
It has been possible for administrators to delete a role whilst that role
has active future references (e.g. default role for self enrolment). When
a user self-enrols on such a course after the role has been removed, the
system would throw an error. This patch prevents removal of roles
referenced as default roles and also prevents system from throwing an error
if the role was somehow removed.
TL-30597 Fixed the report builder course category filter showing an error message when using hidden categories.
Previously when there are hidden categories in a site and a user tried to
use the "Course Category (multichoice)" filter in a report, the category
picker would display an error message. With this fix categories the user
can see should be listed without the error message.
TL-30599 Added relationship validation check for update_section_settings_validation graphql call
TL-30614 Added CSS.AllowTricky to the HTMLPurifier configuration to allow page layout modifying CSS which does not directly constitute a security risk
TL-30636 Enabled localisation for custom field checkbox options in totara catalog
TL-30653 Updated the reCAPTCHA endpoints to use internationally accessible URLs
TL-30654 Implemented return methods for organisation and position webservices
Previously, these webservices always returned a null value (instead of a
'proper' value eg list of org frameworks) when the webservice was accessed
by REST clients.
This patch fixes the return methods for these webservices.
TL-30688 Book Activity print stylesheet is now correctly applied
TL-30689 Fixed current learning block always using default alert period
TL-30702 Fixed an error creating the "Resources Engagement" report that happened when "Recommendations" was turned off in Engage settings
TL-30752 Added missing multilang filter support to the Recently Viewed block
TL-30754 The drag and drop notification on course pages no longer makes items unclickable after it disappears
TL-30763 Improved the displayed error message for non-existent workspaces or discussions
TL-30768 Removed extra space above logo in mobile widths
TL-30822 Changed the Report builder table to stay below the graph in the report graph block when changing the page or sorting the table
TL-30823 Fixed notification not being sent when seminar booking is cancelled due to user unenrolment
TL-30833 Fixed error when checking whether competency profile can be viewed of a deleted user
TL-30834 Added HTML sanitization when displaying draft content in atto editor
TL-30835 Fixed the display of error notifications when attempting to approve seminar requests
TL-30847 Improved height calculation incorporating available window height when using SCORM packages
TL-30861 Fixed a bug when adding more than 10 programs to badge criteria
Prior to this patch, badge access could not be activated when there were
more than 10 programs assigned to the badge criteria in combination with
selecting the option "Complete all of the selected programs". This patch
fixes this bug.
TL-30903 Fixed incorrect conversion of emojis in the JSON editor emoji node to the correct HTML entities and unicode characters
TL-30913 Fixed member add/remove capability checks for Workspace Owner role
TL-30927 Resource side panel tabs are correctly displayed as tabs when there is enough width
TL-30930 Fixed missing password message displays when the Unmask password is selected
TL-30936 Behat multiselect matches checks now works as expected
The behat steps `And the field "" does not match value ""` and `And the field "" matches value ""` now work correctly when pointing to a multiselect HTML
input
TL-30959 Fixed notifications for performance activities not being sent in the preferred language of the recipients
Notifications for performance activities are now sent in the preferred
language of the recipient. If the recipient is an external participant it
will use the default language of the site.
TL-30962 Blanked out content text field during a soft delete of a comment
Previously, only the content field in comment database record was cleared
in a soft delete; the contexttext column still showed the original comment.
This patch makes sure the contenttext column gets cleared as well.
TL-30966 Fixed a bug where notify_added_to_workspace_task triggers an error if a member user is deleted before a notification is sent
TL-30968 Fixed performance activity name not being formatted by format_string in several places
TL-30969 Fixed bug where .ods and .xlsx spreadsheet downloads are corrupted by double-quotes in sheet title
TL-30991 Fixed Responsive component losing resizes in rapid succession
TL-30995 Fixed modal transitions ending early
TL-31017 Fixed issue when creating a workspace with a description in Safari causing a navigate away browser notification
TL-31039 Fixed notification not being sent on room change for 'One message per date' setting
Prior to this patch, when the 'One message per date' setting was turned on
in the seminar global settings and room or facilitator changes were made to
a session, the 'Date/time changed' notifications were not sent to the
participant. This patch fixes the issue, so that notifications will be sent
in this case.
TL-31078 Fixed placeholder dropdown appearing when clicked randomly inside the editor
TL-31088 Allow admin to edit notification preferences for other users
TL-31144 Fixed theme formatter to not force theme files to have default versions
TL-31185 Fixed the Inappropriate Content report displaying an error when a comment with a embedded image is reported.
TL-31191 Fixed loading of current and archived assignments on the competency profile
When a user got unassigned due to not being part of the assigned group
anymore, the competency profile and competency details page still showed
the unassigned competency under the current assignments. This has been
fixed. Unassigned competencies are now treated the same as archived
assignments and show up under the archived assignments list.
TL-31196 Fixed email mustache template to use colours from theme settings
TL-31212 Fixed broken engage workspace library search
TL-31217 Removed horizontal scrollbar when viewing the activity completion report (in a course)
TL-31249 Fixed notification property overrides not returning to their inherited value
When override of Recipient, Schedule or Status was disabled, the form was
failing to revert to the inherited value. Additionally, the Recipient
property did not revert to the inherited value when saved (Schedule and
Status were correctly reverting to the inherited value when saved). All
form properties now correctly revert to the inherited value when an
override is disabled and the correct data is recorded when saved.
TL-31251 Modified Report Builder graphs to respect the 'Maximum number of used records' setting instead of current page limit
TL-31374 Fixed missing and broken event name strings in notifications
When notifications are edited (even as simple a change as enabling or
disabling) then an event log entry is recorded. The name strings for these
events were missing, and would result in an error when accessing the event
log.
API changes:
TL-30635 Made grade feedback format an optional value for get_grade_items webservice return values
TL-30804 Parse GraphQL from page controllers
Contributions:
* David Scotson - Synergy Learning - TL-30689
* Davo Smith - Synergy Learning - TL-30936
* Joseph Kelly - Digital Learning (Chile) - TL-30654
Release 13.9 (28th June 2021):
Important:
TL-31000 Changed the default of the "Disable consistent cleaning" setting to "Yes" when upgrading from version 12 or lower to 13
With Totara 13 the new “Disable consistent cleaning” security setting
was introduced. Prior to this patch, upgrading from Totara 12 or lower to
Totara 13 left this new setting disabled, thereby introducing added
security but potentially leading to unintentional data loss when editing
existing HTML content. With this patch, upgrading from Totara 12 or lower
to Totara 13 will enable this setting to preserve previous behaviour in
order to prevent data loss.
Performance improvements:
TL-30630 Fixed counting likes/comments in a workspace discussion multiple times in one request
Previously when loading a list of discussions in a workspace, the number of
likes and number of comments for each discussion were independently
queried, resulting in a large number of queries run for a single request.
With this patch in place when loading a list of workspace discussions, the
counts are performed once with the initial query, decreasing the number of
queries needed to return the results.
TL-30973 Improved the performance of the Record of Learning: Course report source when used with a very large number of course completion history records
Prior to this patch on older databases a large number of course completion
history records (in the millions) would slow down the Record of Learning:
Course report when the Past Completions columns were added. With this patch
the report should now behave faster when used with a large dataset.
Important: This change introduces a new index on the
course_completion_history table, which can take several minutes to run on a
large Totara instance.
TL-31089 Improved user content restriction query performance
Mainly on MySQL databases the user content restrictions were scaling poorly
with larger amounts of job assignment records. This has been fixed and
performance on MySQL 5.7 and MySQL 8 is now significantly improved if user
content restrictions are used in reports.
TL-31095 Improved performance of reports based on the user source when certain count columns are used
The query part for the following columns changed to improve performance:
* User's Achieved Competency Count
* User's Courses Started Count
* User's Courses Completed Count
* Course Completions as Evidence
* Extensions
Improvements:
TL-29734 Updated 'help command' into 'hero card' that contains 'sign-in', 'sign-out' and 'help' button in Microsoft Teams
TL-30025 Created a new 'help tab' to display 'help' information in Microsoft Teams
TL-30027 Added sign-out link for manual login settings on each static tab in Microsoft Teams
TL-30221 Added 'Achievement Status' column and filter to the Competency Status report
It is now possible to filter records shown in the Competency Status report
on the Achievement status column thus allowing users to view only active
(current) achieved values.
TL-30395 Set loglevel to "warn" in .npmrc, which suppresses "notice" level output such as the core-js advertising on npm ci / npm install.
TL-30791 Added a logo button to use by default for Microsoft OAuth2 issuers on the site login page
A new option has been added to Microsoft issuers for the OAuth2 plugin,
named 'Show default Microsoft branding'. This ensures that any new issuers
of the Microsoft type meet Microsoft's corporate branding requirements.
Existing issuers of the Microsoft type are not affected by this change.
TL-30794 Added config for report builder graph to specify max value for x and y axes
TL-30797 A users competency page now uses up to 2 lines when viewing the competency graph
TL-30852 Renamed the 'Open in new window' button in Microsoft Teams to 'Open in browser'
TL-31009 Adjusted the default scheduled 'send_registration_data_task' task to randomise the time it is run to distribute the load
The change also uses an upgrade script to reset the task to ensure the
new 'randomised' time is set.
TL-31021 Ensure MS teams theme CSS is compatible with older browsers
TL-31038 Added settings option to Microsoft Teams tabs to allow the modification of existing tabs
Bug fixes:
TL-28866 Fixed the report builder course category filter showing the hidden workspace and performance activity categories.
TL-29257 Fixed styling of "programs" header in record of learning
TL-29923 Clicking on a link in a navigation block no longer expands the node
TL-29958 Report tiles no longer have the brand colour in their shadow
TL-30032 Added the alert when users visit external url from totara msteams tabs
TL-30057 Fixed pulling the image from Vimeo to render on resource cards when Vimeo config is enabled
TL-30072 Fixed page advancement on multi-value multichoice questions in lessons
When using a multi-choice question with multiple answers in a lesson where
the user is allowed to have multiple attempts, the system now uses the
defined 'Jump to' page as defined in the answers as follows:
* If the answer is correct, i.e. all the correct answer(s) are selected
without selecting an incorrect answer, the 'Jump to' value of the first
correct answer is used.
* If the answer is not totally correct, i.e. not all correct answer(s) are
selected or any incorrect answer is selected, the 'Jump to' value of the
first incorrect answer is used.
* It only some of the correct answers are selected and the question has no
incorrect answers defined, the user will stay on the same page.
TL-30119 The bottom of 'g' is no longer hidden in a mini profile card
TL-30254 Fixed error being caused when mathjax filter was enabled
TL-30359 Fixed a report builder bug where tag filter could exclude rows without any tags
Prior to this patch, reports that had a tag filter added did not show rows
without any tags assigned when resetting the tag filter to the 'Any value'
option after having it set to another option. This bug is fixed with this
patch.
TL-30481 Fixed PHP warning if language pack cannot be downloaded and provided option to retry or choose different language
TL-30563 Fixed bug causing enrolment error exception when default role has been deleted
It has been possible for administrators to delete a role whilst that role
has active future references (e.g. default role for self enrolment). When
a user self-enrols on such a course after the role has been removed, the
system would throw an error. This patch prevents removal of roles
referenced as default roles and also prevents system from throwing an error
if the role was somehow removed.
TL-30597 Fixed the report builder course category filter showing an error message when using hidden categories.
Previously when there are hidden categories in a site and a user tried to
use the "Course Category (multichoice)" filter in a report, the category
picker would display an error message. With this fix categories the user
can see should be listed without the error message.
TL-30599 Added relationship validation check for update_section_settings_validation graphql call
TL-30614 Added CSS.AllowTricky to the HTMLPurifier configuration to allow page layout modifying CSS which does not directly constitute a security risk
TL-30636 Enabled localisation for custom field checkbox options in totara catalog
TL-30653 Updated the reCAPTCHA endpoints to use internationally accessible URLs
TL-30654 Implemented return methods for organisation and position webservices
Previously, these webservices always returned a null value (instead of a
'proper' value eg list of org frameworks) when the webservice was accessed
by REST clients.
This patch fixes the return methods for these webservices.
TL-30688 Book Activity print stylesheet is now correctly applied
TL-30689 Fixed current learning block always using default alert period
TL-30702 Fixed an error creating the "Resources Engagement" report that happened when "Recommendations" was turned off in Engage settings
TL-30752 Added missing multilang filter support to the Recently Viewed block
TL-30754 The drag and drop notification on course pages no longer makes items unclickable after it disappears
TL-30763 Improved the displayed error message for non-existent workspaces or discussions
TL-30768 Removed extra space above logo in mobile widths
TL-30822 Changed the Report builder table to stay below the graph in the report graph block when changing the page or sorting the table
TL-30823 Fixed notification not being sent when seminar booking is cancelled due to user unenrolment
TL-30833 Fixed error when checking whether competency profile can be viewed of a deleted user
TL-30834 Added HTML sanitization when displaying draft content in atto editor
TL-30835 Fixed the display of error notifications when attempting to approve seminar requests
TL-30847 Improved height calculation incorporating available window height when using SCORM packages
TL-30861 Fixed a bug when adding more than 10 programs to badge criteria
Prior to this patch, badge access could not be activated when there were
more than 10 programs assigned to the badge criteria in combination with
selecting the option "Complete all of the selected programs". This patch
fixes this bug.
TL-30903 Fixed incorrect conversion of emojis in the JSON editor emoji node to the correct HTML entities and unicode characters
TL-30913 Fixed member add/remove capability checks for Workspace Owner role
TL-30930 Fixed missing password message displays when the Unmask password is selected
TL-30936 Behat multiselect matches checks now works as expected
The behat steps `And the field "" does not match value ""` and `And the field "" matches value ""` now work correctly when pointing to a multiselect HTML
input
TL-30959 Fixed notifications for performance activities not being sent in the preferred language of the recipients
Notifications for performance activities are now sent in the preferred
language of the recipient. If the recipient is an external participant it
will use the default language of the site.
TL-30962 Blanked out content text field during a soft delete of a comment
Previously, only the content field in comment database record was cleared
in a soft delete; the contexttext column still showed the original comment.
This patch makes sure the contenttext column gets cleared as well.
TL-30966 Fixed a bug where notify_added_to_workspace_task triggers an error if a member user is deleted before a notification is sent
TL-30968 Fixed performance activity name not being formatted by format_string in several places
TL-30969 Fixed bug where .ods and .xlsx spreadsheet downloads are corrupted by double-quotes in sheet title
TL-30991 Fixed Responsive component losing resizes in rapid succession
TL-30995 Fixed modal transitions ending early
TL-31017 Fixed issue when creating a workspace with a description in Safari causing a navigate away browser notification
TL-31039 Fixed notification not being sent on room change for 'One message per date' setting
Prior to this patch, when the 'One message per date' setting was turned on
in the seminar global settings and room or facilitator changes were made to
a session, the 'Date/time changed' notifications were not sent to the
participant. This patch fixes the issue, so that notifications will be sent
in this case.
TL-31078 Fixed placeholder dropdown appearing when clicked randomly inside the editor
TL-31111 Updated user details during user creation
Previously, when an oauth2 authenticated user first logged onto Totara,
only a few key fields were populated in that user's mdl_user record (eg
alternatename, firstname, lastname). The user had to log on a second time
before other fields (eg description, city, country) were updated in the
record.
This patch fixes the user creation process so that all details are put into
the user record on the first login.
TL-31144 Fixed theme formatter to not force theme files to have default versions
TL-31185 Fixed the Inappropriate Content report displaying an error when a comment with a embedded image is reported.
TL-31191 Fixed loading of current and archived assignments on the competency profile
When a user got unassigned due to not being part of the assigned group
anymore, the competency profile and competency details page still showed
the unassigned competency under the current assignments. This has been
fixed. Unassigned competencies are now treated the same as archived
assignments and show up under the archived assignments list.
TL-31212 Fixed broken engage workspace library search
TL-31217 Removed horizontal scrollbar when viewing the activity completion report (in a course)
TL-31251 Modified Report Builder graphs to respect the 'Maximum number of used records' setting instead of current page limit
API changes:
TL-30635 Made grade feedback format an optional value for get_grade_items webservice return values
Contributions:
* David Scotson - Synergy Learning - TL-30689
* Davo Smith - Synergy Learning - TL-30936
* Joseph Kelly - Digital Learning (Chile) - TL-30654
Release 12.32 (28th June 2021):
Performance improvements:
TL-31089 Improved user content restriction query performance
Mainly on MySQL databases the user content restrictions were scaling poorly
with larger amounts of job assignment records. This has been fixed and
performance on MySQL 5.7 and MySQL 8 is now significantly improved if user
content restrictions are used in reports.
TL-31095 Improved performance of reports based on the user source when certain count columns are used
The query part for the following columns changed to improve performance:
* User's Achieved Competency Count
* User's Courses Started Count
* User's Courses Completed Count
* Course Completions as Evidence
* Extensions
Improvements:
TL-31009 Adjusted the default scheduled 'send_registration_data_task' task to randomise the time it is run to distribute the load
The change also uses an upgrade script to reset the task to ensure the
new 'randomised' time is set.
Bug fixes:
TL-30072 Fixed page advancement on multi-value multichoice questions in lessons
When using a multi-choice question with multiple answers in a lesson where
the user is allowed to have multiple attempts, the system now uses the
defined 'Jump to' page as defined in the answers as follows:
* If the answer is correct, i.e. all the correct answer(s) are selected
without selecting an incorrect answer, the 'Jump to' value of the first
correct answer is used.
* If the answer is not totally correct, i.e. not all correct answer(s) are
selected or any incorrect answer is selected, the 'Jump to' value of the
first incorrect answer is used.
* It only some of the correct answers are selected and the question has no
incorrect answers defined, the user will stay on the same page.
TL-30359 Fixed a report builder bug where tag filter could exclude rows without any tags
Prior to this patch, reports that had a tag filter added did not show rows
without any tags assigned when resetting the tag filter to the 'Any value'
option after having it set to another option. This bug is fixed with this
patch.
TL-30636 Enabled localisation for custom field checkbox options in totara catalog
TL-30653 Updated the reCAPTCHA endpoints to use internationally accessible URLs
TL-30688 Book activity print view uses the same font as the web view
TL-30822 Changed the Report builder table to stay below the graph in the report graph block when changing the page or sorting the table
TL-30823 Fixed notification not being sent when seminar booking is cancelled due to user unenrolment
TL-30861 Fixed a bug when adding more than 10 programs to badge criteria
Prior to this patch, badge access could not be activated when there were
more than 10 programs assigned to the badge criteria in combination with
selecting the option "Complete all of the selected programs". This patch
fixes this bug.
TL-30930 Fixed missing password message displays when the Unmask password is selected
TL-30936 Behat multiselect matches checks now works as expected
The behat steps `And the field "" does not match value ""` and `And the field "" matches value ""` now work correctly when pointing to a multiselect HTML
input
TL-31217 Removed horizontal scrollbar when viewing the activity completion report (in a course)
TL-31251 Modified Report Builder graphs to respect the 'Maximum number of used records' setting instead of current page limit
Contributions:
* Davo Smith - Synergy Learning - TL-30936
Release 11.41 (28th June 2021):
Improvements:
TL-31009 Adjusted the default scheduled 'send_registration_data_task' task to randomise the time it is run to distribute the load
The change also uses an upgrade script to reset the task to ensure the
new 'randomised' time is set.
Bug fixes:
TL-30072 Fixed page advancement on multi-value multichoice questions in lessons
When using a multi-choice question with multiple answers in a lesson where
the user is allowed to have multiple attempts, the system now uses the
defined 'Jump to' page as defined in the answers as follows:
* If the answer is correct, i.e. all the correct answer(s) are selected
without selecting an incorrect answer, the 'Jump to' value of the first
correct answer is used.
* If the answer is not totally correct, i.e. not all correct answer(s) are
selected or any incorrect answer is selected, the 'Jump to' value of the
first incorrect answer is used.
* It only some of the correct answers are selected and the question has no
incorrect answers defined, the user will stay on the same page.
TL-30359 Fixed a report builder bug where tag filter could exclude rows without any tags
Prior to this patch, reports that had a tag filter added did not show rows
without any tags assigned when resetting the tag filter to the 'Any value'
option after having it set to another option. This bug is fixed with this
patch.
TL-30861 Fixed a bug when adding more than 10 programs to badge criteria
Prior to this patch, badge access could not be activated when there were
more than 10 programs assigned to the badge criteria in combination with
selecting the option "Complete all of the selected programs". This patch
fixes this bug.
Release 10.45 (28th June 2021):
Bug fixes:
TL-30861 Fixed a bug when adding more than 10 programs to badge criteria
Prior to this patch, badge access could not be activated when there were
more than 10 programs assigned to the badge criteria in combination with
selecting the option "Complete all of the selected programs". This patch
fixes this bug.